RESIN BOUND PRODUCTS
Glo-bound markers can be installed into any new resin bound surface, such as pathways, cycle tracks, driveways or platforms to illuminate edging and hazards and provide wayfinding solutions. No cabling or batteries are required, as the discs are charged in daylight glowing throughout the night.
Resin Bound products
50mm Resin Bound Discs
50mm Resin Bound Squares
50mm Resin Bound Squares
Pack of 10 Glo-bound discs
Available in 'glow-green' or 'glow blue'
Diameter of disc = 50mm
50mm Resin Bound Squares
50mm Resin Bound Squares
50mm Resin Bound Squares
Pack of 10 Glo-bound squares
Available in 'glow-green' or 'glow blue'
Diameter of square = 50mm
75mm Resin Bound Discs
50mm Resin Bound Squares
75mm Resin Bound Square
Pack of 10 Glo-bound discs Available in 'glow-green' or 'glow-blue' diameter of disc = 75mm
75mm Resin Bound Square
75mm Resin Bound Square
75mm Resin Bound Square
Pack of 10 Glo-bound squares Available in 'glow-green' diameter of square= 75mm
75mm Anti-Slip Disc
75mm Resin Bound Square
75mm Anti-Slip Square
Pack of 10 Glo-bound discs with an anti slip centre Available in 'glow-green' diameter= 75mm.
75mm Anti-Slip Square
75mm Resin Bound Square
75mm Anti-Slip Square
Pack of 10 Glo-bound squares with an anti slip centre Available in 'glow-green' diameter= 75mm.
disc marker
20mm Resin Bound Disc Marker is ideally suited for pathways and areas of access that would benefit from guidance lighting but are unsuited for artificial electrical lighting to be installed. By using our disc markers pathways can be navigated by pedestrians during hours of darkness, increasing their safety.
Branding Disc Markers
I-Glo branding is an extremely effective way of branding/advertising. Your illuminated brands, logo’s and QR codes attract attention, particularly at night- time, increasing awareness and once scanned drive traffic directly to your website.
Branding can be embedded into any shape which can be surface mounted, using screws or adhesive, or drilled into any existing surface so that it becomes flush with that surface. Having your branding inscribed onto I-Glo products sends out the right message to your customer base –‘reduction on carbon footprint’
Pathways of branded discs can be a great way of attracting and guiding your customers to your premises.
Encased Branding Disc
Branding discs are encased within a resin housing which can be surface mounted on to a floors surface or floated into a wet mix such as resin bound, concrete or wet mix rubber.
Composite / Wood Discs
I-Glo Decking discs- the new long-lasting glow-in-the-dark solution designed to improve safety and aesthetics for your outdoor living space
No cabling or batteries are required, as the discs are charged in daylight glowing throughout the night.
The discs are recessed into your decking using a disc borer or adjustable spade bit to ensure they are flush with the boards. I-Glo Decking discs have been designed in three different versatile shapes that offer safety for your decking area.
I-glo Decking Squares have been designed to bring glow-in-the dark safety to stair risers, or other potentially hazardous outdoor areas which require marking.
Simply stick onto a clean/dust free surface using a weatherproof adhesive and press down to secure.
Glow in the dark discs
I-glo disc markers can be installed into any existing tarmac surface such as pathways, cycle tracks, driveways, or platforms. They are installed by creating a recess using an i-glo cutter attachment which fits into any standard SDS drill. The discs are then glued into the recess, using a weatherproof adhesive, so that they are flush with the surrounding tarmac surface.
The Discs are available in the following sizes-
Discs – 50mm, 75mm and 110mm
Block Paving Discs
I-glo discs can be installed into new or existing block paving. They are installed by creating a recess by using an i-glo cutter attachment which fits into any standard SDS drill.
The discs are then glued into the recess, using a weatherproof adhesive so that they are flush with the surrounding block paving surface.
The markers are available in the following sizes
Discs- 50mm and 75mm
I-glo SDS Cutters
Tarmac Core Drill
Concrete Core Drill
Concrete Core Drill
50mm or 110mm Available. I-glo disc markers can be installed into any existing tarmac surface such as pathways, cycle tracks, driveways, or platforms. They are installed by creating a recess using an I-glo cutter attachment which fits into any standard SDS drill.
Concrete Core Drill
Concrete Core Drill
Concrete Core Drill
50mm or 75mm Available. I-glo discs can be installed into new or existing block paving. They are installed by creating a recess by using an I-glo cutter attachment which fits into any standard SDS drill.
Fast Delivery. No Minimum Order
Get the products you need- when you need them.
At I-glo, we offer next-day dispatch and no minimum order requirements.
Whether you're a large contractor or placing a one-off order, we've got you covered.
(Please note- Tactiles are sold in box's of 10 tiles)